Once you've decided to automate pallet feeding into your palletizing line, the next decision is how much unattended capacity the infeed needs — a single-stack magazine or a multi-stack configuration that runs longer between reloads. Here's the practical comparison.
Single-Stack Magazine Feed
A single-stack pallet dispenser holds one stack of empty pallets and feeds them down one at a time as the palletizer consumes them. This is the simpler, lower-cost configuration, and it fits well on lines with regular staff presence nearby who can reload the magazine between stacks without disrupting the line's overall rhythm — a stack of standard pallets typically supports a reasonable run before needing a reload.
The trade-off is unattended runtime: a single-stack configuration ties your line's continuous run length to how frequently someone reloads pallets, which limits how far you can push toward lights-out or reduced-supervision operation at the palletizing end.
Multi-Stack / Extended Magazine Feed
A multi-stack or extended-capacity configuration holds more pallets in the infeed buffer, extending the time the line can run before needing a reload. This suits higher-throughput lines, operations targeting longer unattended runs, or facilities where the palletizing area isn't staffed continuously.
The trade-off is footprint and cost — a larger magazine takes up more floor space at the infeed end of the line and adds cost over the simpler single-stack configuration, which only makes sense if your actual throughput and staffing pattern will use the extra capacity.
Matching Configuration to Your Line
| Factor | Single-Stack | Multi-Stack / Extended |
|---|---|---|
| Best for | Lower throughput, staff nearby | Higher throughput, extended unattended runs |
| Footprint | Smaller | Larger |
| Cost | Lower | Higher |
| Reload frequency | More frequent | Less frequent |
The right configuration depends on your palletizer's actual consumption rate (tied to its rated speed and your product), how frequently staff pass by the infeed end of the line during a shift, and whether extending unattended run time is an actual operational goal or a nice-to-have that doesn't justify the added footprint and cost.
Delivered as Part of the System
Because pallet dispenser sizing depends entirely on the palletizer it's feeding and your pallet type, ENZAC specifies and delivers it as an integrated infeed component of the Palletizer system — matched to your product mix, pallet type, and required run length between reloads — rather than as a standalone product picked off a separate catalogue.
Ready to talk about your pallet dispenser?
Not sure whether your line needs single-stack or extended magazine capacity? Send ENZAC your palletizer throughput, pallet type, and staffing pattern and we'll help you size the right infeed configuration.